GT-021B reverse osmosis membrane acid cleaning agent used in cleaning system fouling, microbial contamination and organic particles attached to the purpose is to improve the reverse osmosis membrane desalination rate, reduce the one or two section of the pressure difference, so as to extend the service life of the film. When GT-023 and GT-021A are used to get the best results, the removal of oil and other organic compounds is very effective, and the removal of biological mucosa is very good.

[range] for aromatic polyamide reverse osmosis membrane, hollow fiber membrane, nanofiltration (NF) and ultrafiltration (UF) membrane.

[main ingredients] organic polymer

[sex] amber liquid

[type number] GT-021B

[H P] 11 + 0.5

[weight] 1.10 + 0.05

[use]

Dilution: the usual dilution ratio is the 2-4% (usually 1:50) of the whole cleaning system, the whole system includes a cleaning tank,

Connecting pipes, filters, pressure vessels, and membranes.

[note]

1 check the cleaning tank and connecting line, and use RO to clean the water through the water.

2 check and replace the new cleaning security filter.

3 by reverse osmosis through water or saline injection in addition to the appropriate amount of cleaning boxes, slow injection dosage calculated, cleaning pump

The mixed solution is heated to the film manufacturer's temperature by the heater.

30 to 4 minutes in the direction of the water cycle. The recommended values for the membrane manufacturer or system supplier shall be for the cleaning flow rate.

5 if the pollution is serious, please put the initial return liquid (volume is about 15% of the washing box), to prevent the re attachment of pollutants

On film surface.

6 for a number of systems, each should be cleaned separately to obtain the maximum effect, if the cleaning solution becomes turbid or pH value exceeds the recommended

In the range of values, the cleaning fluid should be drained and re - configured for cleaning the other sections.

7 in the system to put into operation before the best use of reverse osmosis through water rinse.

Note: ~ ~ this product should avoid direct contact with eyes, skin. Once in contact, rinse immediately with plenty of water, not delay. Manual operation should wear protective glasses and anti acid and alkali gloves. The company is only responsible for the quality of the product, due to other factors caused by improper results, will not be responsible for.

[packing capacity] 25 kg/ or by customer requirements

[duration] a year

[Methods] Please place a dry, cool place.

[production date] see seal or code

[manufacturers] Guangzhou Environmental Technology Co., Ltd.

[production] address the South District of Guangzhou city in Ginza square 408 Jin Sha Avenue

[words] 02039390160

[true] 02084956611

双语对照