产品应用案例
- Technology
- Common Questions The Application
CASE
GT-D03 Reverse Demulsification Coagulant - Silicone Oil Wastewater Example
Project description
The plant wastewater is a kind of silicone oil, which is extracted from the waste silica gel. When the oil is extracted with a cracked pot, the catalyst is used to add the catalyst. Waste water produced in the reaction of the flushing
The plant wastewater is a kind of silicone oil, which is extracted from the waste silica gel. When the oil is extracted with a cracked pot, the catalyst is used to add the catalyst. Waste water produced in the reaction of the flushing
Description
An example of silicone oil wastewater in a design institute
Project description
The plant wastewater is a kind of silicone oil, which is extracted from the waste silica gel. When the oil is extracted with a cracked pot, the catalyst is used to add the catalyst. Waste water produced in the reaction of the flushing reaction. PH 1.
The wastewater treatment process flow is as follows:
Flashball water regulating tank flashball demulsification flashball sedimentation tank tank flashball neutralization tank flashball flashball biochemical pool water
The company GT-D01 demulsifier is mainly used in the preprocessing stage as the best choice for demulsification trough, demulsification. By the way can remove the demulsification of emulsified oil, which is conducive to the subsequent processing. Breaking GT-D01 emulsion oil removal rate can reach more than 95% and on the plant wastewater is extremely obvious demulsification and flocculation effect and dosage of small, fast reaction speed, COD removal rate is high.
Use effect diagram
Below is the GT-D03 of cutting liquid wastewater of the factory after demulsification effect:
The demulsification after demulsification
Test data are as follows:
Test data
After treatment
PH 15
COD (mg/L) 187004200
SS (mg/L) 287055
Oil (mg/L) 2500201
