Example of a factory machining cutting fluid wastewater in Zhejiang

A brief introduction to the situation

Cutting fluid is a kind of industrial use liquid in metal cutting and grinding process, which is used to cool and lubricate cutting tools and machining parts. The cutting fluid is compounded by various kinds of super powerful functions. The wastewater from the production of the product is mixed with water.

The wastewater treatment process is as follows:

The water - > > > reservoir > > > > > > > > > > > > > > > > > > > > > >, three - stage air floatation > >: > > > > > > > > > > > > > > > >

The company's products GT-D03 for cutting liquid wastewater is extremely obvious demulsification and flocculation, with adding small amount, fast response speed, good effect and other excellent characteristics, oil removal rate can reach 95%, COD removal rate can reach 75%.

The demulsifier GT-D03 application in front of the flotation process, such as a pool of demulsification, adding in the emulsion breaking pool can also be in the wastewater into the air tank continuously and uniformly adding demulsifier GT-D03, fully and uniformly mixed reaction which chemicals and wastewater.

Two, the experimental effect diagram

Below is the GT-D03 of cutting liquid wastewater of the factory after demulsification effect: