Jiangxi XX alloy material Co., Ltd

Project description:

The wastewater from the factory is mixed with water and produced by the copper wire drawing oil and water, which contains a relatively stubborn emulsion composition, and the waste water is weakly alkaline. PH 8.

The wastewater treatment process flow is as follows:

Water -- > regulation pool -- > emulsion breaking groove -- > reaction tank flocculation -- > clarification pool -- > electrolysis pool -- > biological contact oxidation pool -- > filtering device -- > effluent

The company GT-D01 demulsifier is mainly used in the preprocessing stage as the best choice for demulsification trough, demulsification. By the way can remove the demulsification of emulsified oil, which is conducive to the subsequent processing. Breaking GT-D01 emulsion oil removal rate can reach more than 95% and on the plant wastewater is extremely obvious demulsification and flocculation effect and dosage of small, GT-D01 demulsifier oil removal rate can reach more than 95%, has an extremely obvious effect on demulsification and flocculation of the wastewater, the dosage of small, fast reaction speed, high removal rate COD.fast reaction speed, COD removal rate is high.

Use effect diagram:

Below is the GT-D01 of the wastewater plant was COD copper wire removal agent after demulsification effect: