产品应用案例
- Technology
- Common Questions The Application
CASE
Application case of GT-D01 in the emulsion breaking
Project description
The factory produced emulsion synthetic wastewater mainly containing oleic acid, sorbitol, oil water emulsifier and other oil package, the wastewater is weak acidity, pH 6.
The wastewater treatment process flow is as follows:
The wa
The factory produced emulsion synthetic wastewater mainly containing oleic acid, sorbitol, oil water emulsifier and other oil package, the wastewater is weak acidity, pH 6.
The wastewater treatment process flow is as follows:
The wa
Description
Hunan Chemical Group Co., Ltd.
Emulsion synthetic wastewater
An example of the synthetic wastewater from Hunan so Chemical Group Co., Ltd.
Project description
The factory produced emulsion synthetic wastewater mainly containing oleic acid, sorbitol, oil water emulsifier and other oil package, the wastewater is weak acidity, pH 6.
The wastewater treatment process flow is as follows:
The water oil separation tank flashball flashball Fenton flashball demulsification sedimentation tank flashball flashball biochemical pool water
The company GT-D01 demulsifier is mainly used in the preprocessing stage as the best choice of demulsification pool, demulsification. By the way can remove the demulsification of emulsified oil, which is conducive to the subsequent processing. Breaking GT-D01 emulsion oil removal rate can reach more than 95% and on the plant wastewater is extremely obvious demulsification and flocculation effect and dosage of small, fast reaction speed, COD removal rate is high.
Use effect diagram
Below is the GT-D01 of the emulsion wastewater plant after demulsification effect:
The demulsification after demulsification
The demulsification after demulsification
检测数据如下表：
| 检测项目 | 检测数据 | |
| 处理前 | 处理后 | |
| pH | 6 | 7 |
| COD （mg/L） | 12000 | 2800 |
| SS （mg/L） | 1560 | 65 |
| 石油类 （mg/L） | 1100 |
46 |
