Products
Special cold - rolled wastewater for steel mills
Steel cold rolling wastewater special agent 1, the company specifically for steel cold rolling wastewater treatment independent research and development of high-tech products. The agent can effectively improve the interfacial tension of the cold-rolled waste film in the steel mill, so that the colloidal particles in the sewage can not lose the repulsive force and attractiveness, and finally lose the stability to form the floc, and further through the chemical bridging, In the separation of oil and water and other toxic and harmful impurities, shorten the separation time, can be miscible with water, and in a wide range of pH value.
Description
GT-D01 Reverse demulsifier

The demulsifier effectively improves the interfacial tension of the water-in-oil (W / O) or oil-in-water (O / W) emulsion, destroying the colloidal particles in the effluent and reducing the stability and the stability Body, and further through the chemical bridge, the final completion of the separation of oil and water in the sewage and harmful impurities separation, shorten the oil and water separation time, can be miscible with water, and in a wide range of pH value.


Products are widely used in oil extraction, processing and refining, paper, chemical fiber textile, chemical and urban wastewater and other waste, waste treatment purification project.


Active ingredients> 95%
Traits:Orange yellow transparent liquid
Model:GT-D01
pH:
3-4
Demulsification time:< 1min


1.In the oily wastewater to add 10-500 ppm (the specific amount can be determined according to field test dosage), stirring 1-2 minutes, you can quickly break the milk.
2.Crude oil dehydration, add 10-30 g / L, stirring, you can achieve oil and water separation, at 40 ~ 60 ℃, the effect is better.
3.The demulsifier has a synergistic effect, before or after the demulsifier dosing by adding 5 to 100 ppm of PAC or PFAC, PFC, can make water quality quickly become clear.
4.Can adjust the amount of demulsifier and the pH of the wastewater to achieve the purpose of rapid demulsification separation. The best pH in the 6 ~ 7 when the best effect.


1.
The agent and the agent of 1 to 3 times the dilution, when the temperature is below 5 ℃ will gradually white, with the temperature drop thickening or even solidification. With the temperature rise, the solidification of the product will gradually melt and thinning, whitening products will gradually restore the transparent. Product solidification or whitening reduction does not affect the performance of transparency.
2.The agent is easily biodegradable, non-toxic.


Safe:①This product should be kept in direct contact with eyes and skin. Once the contact, immediately rinse with plenty of water, can not be delayed. Manual operation should wear protective glasses and anti-acid gloves.
            ②The company is only responsible for the quality of this product, due to other factors caused by improper results, are not responsible.
Package:25 kg / barrel or according to customer requirements.
Stockpile:Please place dry and cool place, shelf life of one year.




 
Recommend
GT-M01 coking wastewater separation agent
GT-M1 series is the company's independent research and
GT-M02 coking wastewater separation agent
GT-M2 series is the company's independent research and
GT-M03 coking wastewater separation agent
GT-M03 series is the company's independent research and
GT-M04 Coking wastewater decolorizer
GT-M04 is a patented product developed by our company.
GT-M05 coking wastewater separation agent
GT-M05 is the company's introduction of foreign advance
GT-M06coking wastewater separation agent
GT-M06 series is the company's independent research and
GT-M07coking wastewater separation agent
GT-M07 series is the company's independent research and
Emulsion special agent 1 (patented product)
GT-D01 demulsifier for emulsion demulsifier, is the com
Emulsion special agent 2 (patented product)
Emulsion special agent 2 is an inorganic polymer graft